BILLETBARN&CORRAL

Pipe Corral and Wire Panels

We can manufacture pipe corral panels for a variety of uses in practically any style. They can be used for individual pens, off of or inside barns, portable pens, arenas, gates, perimeter fencing, handrails, etc.  Styles include with full or partial wire attached, individual lengths  from 1/2' to 24', 1 5/8" and 1 7/8" pipe diameter, heights up to 8', and number of rails, bottom rail, slots for feeders and waterers, etc.  We even occasionally build bias (slanted) panels to adjust for slope changes. We produce a high-quality panel that can be found nowhere else.  Gates are reinforced.  Standard latches are welded-on and the components (including the horseshoes) are zinc plated before welding to resist rusting.   Welds are coated with a high-quality zinc based paint.   Caps are welded-on.   Standard panels have vertical legs every 6'.  Quality hinges are used on all gates. For longer lines of panels, we can provide heavy (sch 40 full weight posts) to be concreted between individual panels.  For heavy-duty applications, tall panels, and swing gates we can use a variety of single, and sometimes double or triple, full weight pipe posts in 1 5/8", 1 7/8", 2 3/8", and 2 7/8" diameters as the situation requires. We use 3 panel clamps per connection, which are included with panels and posts.
Serving California’s L.A., Ventura, and Kern counties, and the immediately surrounding areas.
BILLETBARN&CORRAL

Pipe Corral and Wire

Panels

We can manufacture pipe corral panels for a variety of uses in practically any style. They can be used for individual pens, off of or inside barns, portable pens, arenas, gates, perimeter fencing, handrails, etc.  Styles include with full or partial wire attached, individual lengths  from 1/2' to 24', 1 5/8" and 1 7/8" pipe diameter, heights up to 8', and number of rails, bottom rail, slots for feeders and waterers, etc.  We even occasionally build bias (slanted) panels to adjust for slope changes. We produce a high-quality panel that can be found nowhere else.  Gates are reinforced.  Standard latches are welded-on and the components (including the horseshoes) are zinc plated before welding to resist rusting.   Welds are coated with a high-quality zinc based paint.   Caps are welded-on.   Standard panels have vertical legs every 6'.  Quality hinges are used on all gates. For longer lines of panels, we can provide heavy (sch 40 full weight posts) to be concreted between individual panels.  For heavy-duty applications, tall panels, and swing gates we can use a variety of single, and sometimes double or triple, full weight pipe posts in 1 5/8", 1 7/8", 2 3/8", and 2 7/8" diameters as the situation requires. We use 3 panel clamps per connection, which are included with panels and posts.
Serving California’s L.A., Ventura, and Kern counties, and the immediately surrounding areas.
Manufacturing and Installing since 1982